Main Configuration Options

AST_OPT_FLAG_EXEC_INCLUDES

00034                       {
00035    /*! Allow \#exec in config files */
00036    AST_OPT_FLAG_EXEC_INCLUDES = (1 << 0),
00037    /*! Do not fork() */
00038    AST_OPT_FLAG_NO_FORK = (1 << 1),
00039    /*! Keep quiet */
00040    AST_OPT_FLAG_QUIET = (1 << 2),
00041    /*! Console mode */
00042    AST_OPT_FLAG_CONSOLE = (1 << 3),
00043    /*! Run in realtime Linux priority */
00044    AST_OPT_FLAG_HIGH_PRIORITY = (1 << 4),
00045    /*! Initialize keys for RSA authentication */
00046    AST_OPT_FLAG_INIT_KEYS = (1 << 5),
00047    /*! Remote console */
00048    AST_OPT_FLAG_REMOTE = (1 << 6),
00049    /*! Execute an asterisk CLI command upon startup */
00050    AST_OPT_FLAG_EXEC = (1 << 7),
00051    /*! Don't use termcap colors */
00052    AST_OPT_FLAG_NO_COLOR = (1 << 8),
00053    /*! Are we fully started yet? */
00054    AST_OPT_FLAG_FULLY_BOOTED = (1 << 9),
00055    /*! Trascode via signed linear */
00056    AST_OPT_FLAG_TRANSCODE_VIA_SLIN = (1 << 10),
00057    /*! Enable priority jumping in applications */
00058    AST_OPT_FLAG_PRIORITY_JUMPING = (1 << 11),
00059    /*! Dump core on a seg fault */
00060    AST_OPT_FLAG_DUMP_CORE = (1 << 12),
00061    /*! Cache sound files */
00062    AST_OPT_FLAG_CACHE_RECORD_FILES = (1 << 13),
00063    /*! Display timestamp in CLI verbose output */
00064    AST_OPT_FLAG_TIMESTAMP = (1 << 14),
00065    /*! Override config */
00066    AST_OPT_FLAG_OVERRIDE_CONFIG = (1 << 15),
00067    /*! Reconnect */
00068    AST_OPT_FLAG_RECONNECT = (1 << 16),
00069    /*! Transmit Silence during Record() */
00070    AST_OPT_FLAG_TRANSMIT_SILENCE = (1 << 17),
00071    /*! Suppress some warnings */
00072    AST_OPT_FLAG_DONT_WARN = (1 << 18),
00073    /*! End CDRs before the 'h' extension */
00074    AST_OPT_FLAG_END_CDR_BEFORE_H_EXTEN = (1 << 19),
00075    /*! Use Zaptel Timing for generators if available */
00076    AST_OPT_FLAG_INTERNAL_TIMING = (1 << 20),
00077    /*! Always fork, even if verbose or debug settings are non-zero */
00078    AST_OPT_FLAG_ALWAYS_FORK = (1 << 21),
00079    /*! Disable log/verbose output to remote consoles */
00080    AST_OPT_FLAG_MUTE = (1 << 22)
00081 };


Enumerations
enum	ast_option_flags { AST_OPT_FLAG_EXEC_INCLUDES = (1 << 0), AST_OPT_FLAG_NO_FORK = (1 << 1), AST_OPT_FLAG_QUIET = (1 << 2), AST_OPT_FLAG_CONSOLE = (1 << 3), AST_OPT_FLAG_HIGH_PRIORITY = (1 << 4), AST_OPT_FLAG_INIT_KEYS = (1 << 5), AST_OPT_FLAG_REMOTE = (1 << 6), AST_OPT_FLAG_EXEC = (1 << 7), AST_OPT_FLAG_NO_COLOR = (1 << 8), AST_OPT_FLAG_FULLY_BOOTED = (1 << 9), AST_OPT_FLAG_TRANSCODE_VIA_SLIN = (1 << 10), AST_OPT_FLAG_PRIORITY_JUMPING = (1 << 11), AST_OPT_FLAG_DUMP_CORE = (1 << 12), AST_OPT_FLAG_CACHE_RECORD_FILES = (1 << 13), AST_OPT_FLAG_TIMESTAMP = (1 << 14), AST_OPT_FLAG_OVERRIDE_CONFIG = (1 << 15), AST_OPT_FLAG_RECONNECT = (1 << 16), AST_OPT_FLAG_TRANSMIT_SILENCE = (1 << 17), AST_OPT_FLAG_DONT_WARN = (1 << 18), AST_OPT_FLAG_END_CDR_BEFORE_H_EXTEN = (1 << 19), AST_OPT_FLAG_INTERNAL_TIMING = (1 << 20), AST_OPT_FLAG_ALWAYS_FORK = (1 << 21), AST_OPT_FLAG_MUTE = (1 << 22) }
Variables
ast_flags	ast_options = { AST_DEFAULT_OPTIONS }
int	option_debug
int	option_maxcalls
double	option_maxload
int	option_verbose

Asterisk developer's documentation :: Codename Pineapple

Main Configuration Options

Detailed Description

Enumerations

Variables

Enumeration Type Documentation

Variable Documentation